Skip to main content

Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

View IP routes

View details about IP routes. You can filter on the route ID.

NOTE:The show action command explains how to change the output format.

Format

/net/route [ {-id <value> | -if <value>} ] show

Object qualifier

Qualifier	Description
-id	Specifies the ID of a route.
-if	Specifies the network interface for which you want to return routes.

Example

The following command displays details of the IP routes RT_1, RT_2, and RT_3:

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/route show -detail

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

1:     ID           = RT_1
       Type         = net
       Target       = 10.64.74.10
       Netmask      = 255.255.255.0
       Gateway      = 10.0.0.1
       Interface    = IF_1
       Health state = OK (5)

2:     ID           = RT_2
       Type         = default
       Target       =
       Netmask      =
       Gateway      = 10.64.74.2
       Interface    = IF_2
       Health state = OK (5)

3:     ID           = RT_3
       Type         = host
       Target       = 10.64.74.168
       Netmask      =
       Gateway      = 10.0.0.3
       Interface    = IF_3
       Health state = OK (5)