Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Baskets

Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

Create SNMP destination

Create an SNMP trap destination for system alerts.

Format

/event/alert/snmp create -host <value> -port <value> -userName <value> [ -authProto { none | md5 { -authPassword <value> | -authPasswordSecure } [ -privProto { none | aes { -privPassword <value> | -privPasswordSecure } | des { -privPassword <value> | -privPasswordSecure } } ] | sha { -authPassword <value> | -authPasswordSecure } [ -privProto { none | aes { -privPassword <value> | -privPasswordSecure } | des { -privPassword <value> | -privPasswordSecure } } ] } ] | -v2c -community <value> }

Action qualifiers

QualifierDescription
-hostType a hostname or IP address of the SNMP destination.
-portType the host port on the SNMP destination that will receive the traps.
-userNameType the username that is used to access the SNMP destination.
-authProtoSpecify the protocol that is used to authenticate access to the SNMP destination. Value is one of the following:
  • none — No authentication
  • md5 — Message-Digest algorithm 5
  • sha — Secure Hash Algorithm
-authPasswordType the authentication password.
-authPasswordSecureSpecify the password in secure mode. The user will be prompted to input the password.
-privProtoSpecify the protocol that is used to enable privacy on the SNMP destination. Value is one of the following:
  • none — No encryption
  • aes — Advanced Encryption Standard
  • des — Data Encryption Standard
-privPasswordType the privacy password.
-privPasswordSecureSpecify the password in secure mode. The user will be prompted to input the password.
-v2cSpecify that an SNMP v2c destination will be created.
-community Specify the SNMP v2c destination community string.

Example

The following command creates an SNMP destination with these settings:

  • Host IP is 10.64.75.1.
  • Host port is 333.
  • Username is user1.
  • Authorization protocol is md5.
  • Authorization password is authpassword1234.
  • Privacy protocol is des.
  • Privacy password is privpassword321.

The SNMP destination receives ID Host1_333:

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /event/alert/snmp create –host 10.64.75.1 –port 333 –userName user1 authProto md5 -authPassword authpassword1234 –privProto des –privPassword privpassword321 
Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

ID = Host1_333
Operation completed successfully.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\