Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Baskets

Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

Change NAS route settings

Change the settings for a NAS route.

Format

/net/nas/route -id <value> set [-type {default | host | net}] [-target <value>] [-netmask <value>] [-gateway <value>]

Object qualifier

QualifierDescription
-idIdentifies the NAS route object.

Action qualifiers

QualifierDescription
-typeSpecify the type of route. Valid values are (case-insensitive):
  • default – System uses the default route/gateway when a more specific host or network route is not available. One default IPv4 and IPv6 route is allowed per interface.
  • host – Create a route to a host.
  • net – Create a route to a subnet.
-targetSpecify the IP address for the target network node based on the value of -type. Valid values are:
  • For a default route, do not specify a value. The system will use the IP address specified for -gateway.
  • For a host route, specify the IP address of a target host.
  • For a net route, specify the IP address of a target subnet. Include the -netmask qualifier for the target subnet.
-netmaskFor a route to a subnet, specify the netmask of the destination subnet.
-gateway Specify the gateway for the route.

Example

The following command changes the target IP address to 10.64.200.11, the netmask to 255.255.255.0, and the gateway to 10.64.74.2 for NAS route route_1:

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456!/net/nas/route -id route_1 set -target 10.64.200.11 ‑netmask 255.255.255.0 -gateway 10.64.74.2 uemcli 
Storage system address: 10.64.75.201
Storage system port: 443
HTTPS connection

ID = route_1
Operation completed successfully.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\