The
PowerVault Manager offers two ways for you to set up and provision your storage system:
Guided setup and provisioning
Manual setup and provisioning
The guided setup and provisioning process provides options for you to quickly set up your system by guiding you through the configuration and provisioning process. It provides you with limited, yet optimal storage configuration options to quickly enable I/O operations.
Manual setup and provisioning process provides more provisioning options and greater flexibility, but with the added complexity of selecting all settings and provisioning options. These include creating disk groups and pools, creating volumes, and mapping volumes to initiators.
NOTE:If you choose to use guided setup, you can still manually provision the system after the system is set up.
Read the Commercial Terms of Sale and End User License Agreement (EULA), and click
Accept.
Specify a new user name and password for the system, and click
Apply and Continue.
The user name and password requirements are described in
User options.
The Welcome panel that is displayed provides options to set up and provision your system. For more information about using these options, see
Guided setup.
NOTE:If you are unable to use the 10.0.0.x network to configure the system, see the
Setting network port IP addresses using the CLI port and serial cable appendix in the
Dell PowerVault ME4 Series Storage System Deployment Guide.
To manually set up and provision a storage system for the first time:
NOTE:If you are unable to use the 10.0.0.x network to configure the system, see the
Setting network port IP addresses using the CLI port and serial cable appendix in the
Dell PowerVault ME4 Series Storage System Deployment Guide.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\