Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge T620 Systems Owner's Manual

Removing A GPU Card

  • CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
  1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.
  2. Lay the system on its side.
  3. Open the system.
  4. Remove the PCIe card holder.
    • CAUTION: Do not use excessive force when removing the cables as it can damage the connectors.
  5. Disconnect the cables from the GPU card.
  6. Open the two PCIe card latches.
  7. Grasp the card by its edge, pull the card up to remove it from the card connector and out of the system.
  8. Replace the filler bracket, if you are not adding another card.
  9. Close the two PCI card latches.
  10. Replace the PCIe card holder.
  11. Close the system.
  12. Place the system upright.
  13. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
    Figure 1. Removing and Installing the GPU Card The figure shows removing and installing a GPU card.
    1. GPU card
    2. SLI data connector
    3. GPU card power connector
    4. GPU card power connector
    5. x16 connector
    6. PCIe card latches (2)

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\