Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Baskets

Dell PowerEdge T620 Systems Owner's Manual

PDF

Installing A GPU Card

  • CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
  • NOTE: Ensure that the GPU card is installed in the x16 slot.
  1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.
  2. Lay the system on its side.
  3. Open the system.
  4. Remove the PCIe card holder.
  5. Open the two PCIe card latches.
  6. Remove the filler brackets.
  7. Locate the x16 slot on the system board.
  8. Insert the GPU card into the slot.
  9. Connect the cables to the GPU card.
  10. Close the two PCIe card latches.
  11. Replace the PCIe card holder.
  12. Close the system.
  13. Place the system upright.
  14. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\