CAUTION: To disconnect a network cable, first unplug the cable
from your computer and then unplug the cable from the network device.
Disconnect all the network cables from the
computer.
Disconnect your computer and all attached
devices from the electrical outlets.
Press and hold the power button while the
computer is unplugged to ground the system board.
Remove the cover.
CAUTION: Before touching anything inside your computer, ground
yourself by touching an unpainted metal surface, such as the metal
at the back of the computer. While you work, periodically touch an
unpainted metal surface to dissipate static electricity, which could
harm internal components.
CAUTION: Make sure that
you place the cooler outlet side of your system at least 5 cm away
from wall to prevent system overheat.
CAUTION: Your
system cannot be placed crosswise and make sure that there is no equipment
on the side cover.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\