G5 5000 Service Manual

Installing the memory module

If you are replacing a component, remove the existing component before performing the installation procedure.

The following images indicate the location of the memory modules and provides a visual representation of the installation procedure.

Image: Installing the memory modules

Align the notch on the memory module with the tab on the memory-module slot.
Insert the memory module into the memory-module connector until the memory module snaps into position and the securing clip locks in place.
NOTE: The securing clips return to the locked position. If you do not hear the click, remove the memory module and reinstall it.
NOTE: If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from the slot.
CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components on the memory module.