Dell OpenManage Server Administrator Version 8.4 Command Line Interface Guide

Omconfig Assign Dedicated Hot Spare

Table 1. omconfig Assign Dedicated Hot Spare
Description	Assigns one or more physical disks to a virtual disk as a dedicated hot spare.
Syntax	`omconfig storage vdisk action=assigndedicatedhotspare controller=id vdisk=id pdisk=<PDISKID> assign=yes`, where id is the controller ID and virtual disk ID as reported by the omreport command. The <PDISK>variable specifies the physical disk. NOTE: To obtain these values, type omreport storage controller to display the controller IDs and then type omreport storage vdisk controller=ID to display the IDs for the virtual disks and physical disks attached to the controller.
Example to	Assign physical disk 3 on connector 0 of controller 1 as a dedicated hot spare to virtual disk 4. On a Serial Attached SCSI (SAS) controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers	`omconfig storage vdisk action=assigndedicatedhotspare controller=1 vdisk=4 pdisk=0:3 assign=yes`
Example for SAS controllers	`omconfig storage vdisk action=assigndedicatedhotspare controller=1 vdisk=4 pdisk=0:2:3 assign=yes`