Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

Serial Communication

Table 1. Serial Communication Options
Group	Option	Valid Arguments	Description
Serial Communication	`--ConTermType`	`Vt100Vt220, Ansi`	Sets the terminal type for your remote console.
	`--ExtSerialConnector`	`Serial1, Serial2, RemoteAccDevice`	Associates the External Serial Connector to Serial Device 1, Serial Device 2, or the Remote Access Device.
	`--FailSafeBaud`	`115200, 57600, 19200, 9600`	The BIOS attempts to determine the baud rate automatically. This failsafe baud rate is used only if the attempt fails.
	`--RedirAfterBoot`	`Enabled, Disabled`	Sets the BIOS console redirection to enable or disable when the operating system is loaded.
	`--SerialComm`	`OnNoConRedir, OnConRedirCom1, OnConRedirCom2, Off`	Enables or disables the serial communication devices (Serial Device 1 and Serial Device 2) in BIOS.
	`--SerialPortAddress`	`Serial1Com1Serial2Com2, Serial1Com2Serial2Com1, Com1, Com2`	Sets the port address for the Serial Devices (COM1=0x3F8, COM2= 0x2F8).