Bootsequence |
Displays the device used to boot the system. |
Numlock |
Displays whether the keypad is used as number keys. |
Embedded Video Controller |
Displays whether the Embedded Video Controller option is enabled
or disabled.
|
Boot Mode |
Displays whether the boot mode is configured to BIOS or Unified
Extensible Firmware Interface (UEFI).
|
Processor C1-E |
Displays the Processor C1-E status. |
CPU Execute Disable |
Displays whether the Execute Disable (XD) option is enabled
or disabled.
|
Processor C State Control |
Displays whether the Processor C State Control option is enabled
or disabled.
|
Processor CMP |
Displays the number of cores enabled per processor. |
User accessible USB Ports |
Displays whether the user-accessible USB port is enabled or
disabled.
|
CPU Virtualization Technology |
Displays the additional hardware capabilities provided by Virtualization
Technology.
|
AC Power Recovery Mode |
Displays the system state when input power is restored after
an outage.
|
Embedded SATA Controller |
Displays whether the embedded SATA controller is set to ATA
mode, RAID mode, or is disabled.
|
SATA Port 0 |
Displays the state of SATA port 0. |
SATA Port 1 |
Displays the state of SATA port 1. |
Dual NIC (1/2) |
Displays whether NIC 1 and NIC 2 with PXE/iSCSI is enabled
or disabled.
|
Dual NIC (3/4) |
Displays whether NIC 3 and NIC 4 with PXE/iSCSI is enabled
or disabled.
|
NIC 1 |
Displays whether the first NIC is enabled (with or without
PXE/iSCSI) or disabled during system boot.
|
NIC 2 |
Displays whether the second NIC is enabled (with or without
PXE/iSCSI) or disabled during system boot.
|
NIC 3 |
Displays whether the third NIC is enabled (with or without
PXE/iSCSI) or disabled during system boot.
|
NIC 4 |
Displays whether the fourth NIC is enabled (with or without
PXE/iSCSI) or disabled during system boot.
|
Trusted Cryptographic Module (TCM) |
Displays whether TCM is on or off. |
Trusted Platform Module (TPM) Security |
Displays whether TPM is off, on with pre-boot measurements,
or on without pre-boot measurements.
|
Internal USB Port (number) |
Displays whether the internal USB is enabled or disabled.
-
NOTE: Server Administrator
may not display the USB sequence number if there is only one USB port
on the system.
|
Operating System Watchdog Timer |
Displays whether the operating system watchdog timer is enabled
or disabled.
|
HT Assist |
Displays the status of the probe filter chipset option. |
Internal SD Card |
Displays whether the internal SD card is enabled or disabled. |
Bezel |
Displays whether the bezel removal intrusion check during system
reboot is enabled or disabled.
|
Console Redirection |
Displays whether the BIOS screen is redirected over a particular
serial port or if it is turned off.
|
Diskette |
Displays whether the diskette is disabled, auto enabled, or
read-only.
|
Demand Based Power Management (DBS) |
Displays whether DBS is enabled or disabled on the system. |
Embedded Hypervisor |
Displays whether the embedded hypervisor is enabled or disabled. |
IDE |
Displays whether the drive is enabled or disabled. |
IDE Primary Drive 0 |
Displays whether the device is automatically detected and enabled
or if the device is disabled.
|
IDE Primary Drive 1 |
Displays whether the device is automatically detected and enabled
or if the device is disabled.
|
Intrusion |
Displays whether the intrusion check is enabled or disabled
during system boot.
|
Mouse |
Displays whether the mouse is enabled or disabled. |
Optical Drive Controller |
Displays whether the optical drive controller is enabled or
disabled.
|
Parallel port address |
Displays whether the address is located on LPT1, LPT2, and
LPT3, or if it is disabled.
|
Parallel port mode |
Displays the setting associated with the parallel port. |
Primary SCSI |
Displays whether the device is on or off. |
RAID on motherboard |
Displays whether RAID-on-motherboard is detected as a RAID
device, a SCSI device, or if the device is disabled during system
boot.
|
RAID Channel A |
Displays whether RAID-on-motherboard Channel A is detected
as a RAID device or a SCSI device.
|
RAID Channel B |
Displays whether RAID-on-motherboard Channel B is detected
as a RAID device or a SCSI device.
|
Serial Port 1 |
Displays whether serial port 1 is mapped to a COM port, COM
port 1, COM port 3, COM1 BMC, BMC Serial, BMC NIC, BMC RAC, or is
disabled.
|
Serial Port 2 |
Displays whether serial port 2 is mapped to a COM port, COM
port 2, COM port 4, or is disabled.
|
Speaker |
Displays whether the speaker is on or off. |
USB or USBB |
Displays whether the USB port is enabled or disabled. |
Secondary SCSI |
Displays whether the device is enabled or disabled. |
Serial Communications |
Displays whether COM port 1 and COM port 2 are off or on with
or without console redirection.
|
Console Redirection After Boot |
Displays whether console redirection after system reboot is
enabled or disabled.
|
External Serial Connector |
Displays whether the external serial connector is mapped to
Serial Device 1, Serial Device 2, or a Remote Access Device.
|
Console Redirection Failsafe Baud Rate |
Displays the setting for console redirection failsafe baud
rate.
|
Serial Address Select |
Displays port address for the serial devices. |