Dell PowerEdge RAID Controller 12 User’s Guide PERC H965i Adapter, PERC H965i Front, PERC H965i MX, and PERC H965e Adapter

View enclosure or backplane properties

Enter the Dell PERC 12 Configuration Utility. See Navigate to the Dell PERC 12 configuration utility.

Click Main Menu > Device Management > Logical Enclosure <enclosure number>. An enclosure number can be 0, 1, 2, 3, 4, and so on.

All the physical disks associated with the selected enclosure are listed.

NOTE:Fields associated with properties that are not applicable are hidden.

Table 1. Enclosure or backplane propertiesEnclosure or backplane properties
Option	Description
Enclosure ID	Displays the persistent ID of the enclosure.
Bay ID	Displays the Bay ID of the enclosure.
Name	Displays the name of the enclosure.
Connector name	Indicates the type of physical connection to the enclosure. All connectors for internal controllers are identified by "00".
Position	Position of an enclosure in the enclosure stack.
State	Displays the state of the enclosure.
Vendor ID	Displays the vendor ID of the enclosure.
Product ID	Displays the product ID of the enclosure.
Location	Displays the location of the enclosure. Location is either internal or external.
Type	Displays the type of the enclosure. The types of enclosures are Virtual SES, SAS Expander, and Managed PCIe Switch.
Product Revision Level	Displays the product revision level of the enclosure.
Number of Slots	Displays the number of slots in the enclosure.
Number of Physical Disks	Indicates the number of PDs installed on the enclosure.
Partner Connector Name	Indicates the connector name of the partner device.
Partner Position	Indicates the position of the partner device.
Partner Enclosure ID	Indicates the enclosure ID of the partner.

NOTE:"Partner" refers to the devices that have multiple paths to communicate for redundancy and load balancing.

NOTE:The Partner entries are displayed only for backplane devices in multipath. Else, it will not be displayed.