Dell PowerEdge RAID Controller 12 User’s Guide PERC H965i Adapter, PERC H965i Front, PERC H965i MX, and PERC H965e Adapter

Select boot mode

1. Enter the Dell PERC 12 Configuration Utility. See Navigate to the Dell PERC 12 configuration utility.
2. Click Main Menu > Controller Management > Advanced Controller Properties.
3. In the Controller Properties section, select either Continue on Errors or Safe Mode on Errors from the Boot Mode list.
   NOTE: By default, the boot mode option is set to Continue on Errors.

   Table 1. Boot mode optionsBoot mode options

   Option	Description
   Continue on Errors	The controller attempts to automatically clear errors and continue booting. Errors can result in safe mode if the controller is unable to clear them.
   Safe Mode on Errors	The controller is routed to safe mode when critical errors arise. PERC firmware disables most of the features on the controller. The controller requires attention from the user to acknowledge and rectify the issues.

4. Click Apply Changes.
   The boot mode operation is completed successfully.