Option | Description |
---|---|
Integrated NIC | Allows you to configure the on-board LAN controller.
|
SATA Operation | Allows you to configure the operating mode of the
integrated hard drive controller.
|
Drives | Allows you to enable or disable the various drives
on-board:
|
Smart Reporting | This field controls whether hard drive errors for integrated drives are reported during system startup. The Enable Smart Reporting option is disabled by default. |
USB Configuration | Allows you to enable or disable the integrated
USB controller for:
All the options are enabled by default. |
Thunderbolt Adapter Configuration | This section allows Thunderbolt Adapter Configuration.
|
USB PowerShare | This option configures the USB PowerShare feature behavior.
This feature is intended to allow users to power or charge external devices, such as phones and portable music players, using the stored system battery power through the USN PowerShare port on the notebook, while the notebook is in a sleep state. |
Audio | Allows you to enable or disable the integrated
audio controller. The option Enable Audio is
selected by default.
Both the options are selected by default. |
Keyboard Illumination | This field lets you choose the operating mode
of the keyboard illumination feature. The keyboard brightness level
can be set from 0% to 100%. The options are:
|
Keyboard Backlight Timeout on AC | The Keyboard Backlight Timeout dims out with AC option. The main keyboard illumination feature is not affected. Keyboard Illumination will continue to support the various illumination levels. This field has an effect when the backlight is enabled. The options are:
|
Keyboard Backlight Timeout on Battery | The Keyboard Backlight Timeout dims out with the Battery option. The main keyboard illumination feature is not affected. Keyboard Illumination will continue to support the various illumination levels. This field has an effect when the backlight is enabled. The options are:
|
Unobtrusive Mode |
When enabled pressing Fn+Shift+B will turn off all light and sound emissions in the system. Press Fn+Shift+B to resume normal operation. |
Miscellaneous Devices | Allows you to enable or disable the following devices:
|
MAC Address Pass-Through |
The feature replaces the external NIC MAC address (in a supported dock or dongle) with the selected MAC address from the system. The default option is to use the Passthrough MAC address. |