Identifying the series of your
Dell PowerEdge servers
The PowerEdge series of servers from
Dell are divided into different categories based on their configuration. They are referred as YX2X, YX3X, YX4X, YX4XX, or YX5XX series of servers. The structure of the naming convention is described below. The letter Y denotes the character in the server model number. The character denotes the form factor of the server. The form factors are listed below:
C- Cloud
F- Flexible
M or MX- Modular
R- Rack
T- Tower
The letter X denotes the numbers in the server model number. The number denotes multiple characteristics about the server. They are listed as follows:.
The first digit (X) denotes the value stream or class of the server.
1-5—iDRAC basic
6-9—iDRAC Express
The second digit denotes the series of the server. It is retained in the server naming convention and does not replace the letter X.
0—series 10
1—series 11
2—series 12
3—series 13
4—series 14
5—series 15
The last digit (X) always denotes the make of the processor as described below:
0-Intel
5-AMD
NOTE For servers that use an AMD processor, the model number is made up of four digits instead of three. The third digit (X) denotes the number of processor sockets that the series of server supports.
1 ̶̶ one socket server
2 ̶̶ two socket server
Table 1. PowerEdge servers naming convention and examples General naming convention used across documentation to see PowerEdge servers.
YX4X systems
YX5X systems
YX4XX systems
YX5XX
PowerEdge M640
PowerEdge R250
PowerEdge R6415
PowerEdge R6515
PowerEdge R440
PowerEdge R750
PowerEdge R7415
PowerEdge R7515
PowerEdge R540
PowerEdge T550
PowerEdge R7425
PowerEdge R6525
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\