- Notes, cautions, and warnings
- Revision history
- Introduction
- System overview
- Initial setup and configuration
- Pre-operating system management applications
- Replacement of hardware components
- System diagnostics and indicator codes
The status LED indicators are located on the chassis and they indicate the condition of the system. If any error occurs, the indicators turn solid amber in color.
Icon | Description | Condition | Corrective action |
---|---|---|---|
Drive indicator | The indicator turns solid amber if there is a drive error. |
| |
Temperature indicator | The indicator turns solid amber if the system experiences a thermal error (for example, the ambient temperature is out of range or there is a fan failure). | Ensure that none of the following conditions exist:
If the problem persists, see Dell Technologies Support. | |
Electrical indicator | The indicator turns solid amber if the system experiences an electrical error (for example, voltage out of range, or a failed power supply unit (PSU) or voltage regulator). | Check the System Event Log or system messages for the specific issue. If it is due to a problem with the PSU, check the LED on the PSU. Reseat the PSU.
If the problem persists, see Dell Technologies Support. | |
Memory indicator | The indicator turns solid amber if a memory error occurs. | Check the System Event Log or system messages for the location of the failed memory. Reseat the memory module.
If the problem persists, see Dell Technologies Support. | |
PCIe indicator | The indicator turns solid amber if a PCIe card experiences an error. | Restart the system. Update any required drivers for the PCIe card. Reinstall the card.
If the problem persists, see Dell Technologies Support. |