Dell VxRail E660, E660F, and E660N Installation and Service Manual

PDF

iDRAC Quick Sync 2 indicator codes

iDRAC Quick Sync 2 module (optional) is on the left control panel of the system.

This image shows iDRAC Quick Sync 2 indicators.


iDRAC Quick Sync 2 indicator code	Condition	Corrective action
Off (default state)	Indicates that the iDRAC Quick Sync 2 feature is powered off. Press the iDRAC Quick Sync 2 button to power on the iDRAC Quick Sync 2 feature.	If the LED fails to power on, reseat the left control panel flex cable and check. If the problem persists, see Dell Technologies Support.
Solid white	Indicates that iDRAC Quick Sync 2 is ready to communicate. Press the iDRAC Quick Sync 2 button to power off.	If the LED fails to power off, restart the system. If the problem persists, see Dell Technologies Support.
Blinks white rapidly	Indicates data transfer activity.	If the indicator continues to blink indefinitely, see Dell Technologies Support.
Blinks white slowly	Indicates that firmware update is in progress.	If the indicator continues to blink indefinitely, see Dell Technologies Support.
Blinks white five times rapidly and then powers off	Indicates that the iDRAC Quick Sync 2 feature is disabled.	Check if the iDRAC Quick Sync 2 feature is disabled by iDRAC. If the problem persists, see Dell Technologies Support. www.dell.com/poweredgemanuals or Dell OpenManage Server Administrator User’s Guide at https://www.dell.com/openmanagemanuals.
Solid amber	Indicates that the system is in fail-safe mode.	Restart the system. If the problem persists, see Dell Technologies Support.
Blinking amber	Indicates that the iDRAC Quick Sync 2 hardware is not responding properly.	Restart the system. If the problem persists, see Dell Technologies Support.