Dell VxRail E660, E660F, and E660N Installation and Service Manual

PDF

Front view of the system

The following figure shows the front view of the VxRail E660, E660F, and E660N 10 x 2.5-inch drive system:

This image shows front view of the 10 x 2.5-inch drive system.


Item	Ports, panels, and slots	Icon	Description
1	Left control panel	N/A	Contains the system health, system ID, status LED, and the iDRAC Quick Sync 2 (wireless) indicator. NOTE:The iDRAC Quick Sync 2 indicator is an optional feature. Status LED: Enables you to identify any failed hardware components. There are up to five status LEDs and an overall system health LED (Chassis health and system ID) bar. For more information, see Status LED indicators section. Quick Sync 2 (wireless): Indicates a Quick Sync enabled system. The Quick Sync feature is optional. This feature allows management of the system by using mobile devices called as OpenManage Mobile (OMM) feature. Using iDRAC Quick Sync 2 with OMM aggregates hardware or firmware inventory and various system level diagnostic and error information that can be used in troubleshooting the system. For more information, see the Dell VxRail E660, E660F, and E660N Technical Specifications.
2	Drive (10)	N/A	Enables you to install drives that are supported on your system.
3	Right control panel	N/A	Contains the power button, USB port, iDRAC Direct micro port, and the iDRAC Direct status LED.
4	VGA port		Enables you to connect a display device to the system.
5	Information tag	N/A	The Information tag is a slide-out label panel that contains system information such as Service Tag and PSNT. If you have opted for the secure default access to iDRAC, then the Information tag will also contain the iDRAC secure default password.

For more information about the ports, see the Dell VxRail E660, E660F, and E660N Technical Specifications.