Installing the
Dell Storage vSphere Client Plugin
To install the
Dell Storage vSphere Client Plugin, register the plugin with VMware vCenter.
Prerequisites
NOTE: This version of
DSITV supports only VMware vCenter Server Appliance. Microsoft Windows vCenter Server is not supported.
- Deploy
DSITV and configure the time zone and network settings.
- Identify the host name or IP address of the VMware vCenter Server.
- Identify the user name and password of a VMware vCenter user with administrator privileges.
- Make sure that
Dell Storage Manager Data Collector is communicating with
Storage Center.
Steps
-
Log in to
DSITV.
-
At the CLI prompt, type
4 and press Enter.
-
Type the host name or IP address of the VMware vCenter Server and press Enter.
-
Type the user name of a VMware vCenter Server user with administrator privileges and press Enter.
-
Type the password of the user with administrator privileges and press Enter.
-
If necessary, retype the password and press Enter to confirm the password.
NOTE: If a server certificate message is displayed, type
y and press Enter to trust the certificate.
-
Type the host name or IP address of
DSITV and press Enter.
-
Type
y and press Enter.
-
After the
vSphere Client Plugin is installed, press Enter to return to the main menu.
Refer to the
Dell Storage vSphere Client Plugin Administrator’s Guide for details about managing and using the
vSphere Client Plugin.