Dell SmartFabric OS10 User Guide Release 10.5.4

PDF

UFT modes

A switch in a Layer 2 (L2) network may require a larger MAC address table size, while a switch in a Layer 3 (L3) network may require a larger routing table size. Unified forwarding table (UFT) offers the flexibility to configure internal L2/L3 forwarding table sizes.

OS10 supports several UFT modes for the forwarding tables. By default, OS10 selects a UFT mode that provides a reasonable size for all tables. The supported UFT modes are: default, scaled-l2–switch, scaled-l3–hosts, and scaled-l3–routes.

NOTE: This feature is not supported on the Z9332F-ON platform.

Table 1. UFT Modes — Table Size for Z9664F-ONUFT Modes —Table Size
UFT Mode	L2 MAC Table Size	L3 Host Table Size	L3 Routes Table Size	Multicast Entries
Scaled-l2–switch	131072	32768	32768	IPv4 Multicast – 3.8k (or) IPv6 Multicast - 480
Scaled-l3–hosts	8192 (8k)	32768	368640	IPv4 Multicast - 9k (OR) IPv6 Multicast - 4k
Scaled-l3–routes	8192 (8k)	368640	32768	IPv4 Multicast - 9k (OR) IPv6 Multicast - 4k
Default	131072	32768	32768	IPv4 Multicast – 3.8k (or) IPv6 Multicast - 480

Table 2. UFT Modes — Table Size for S4048–ON, S4048T-ON, S6010–ONUFT Modes —Table Size
UFT Mode	L2 MAC Table Size	L3 Host Table Size	L3 Routes Table Size
Scaled-l2–switch	294912	16384	16384
Scaled-l3–hosts	98304	212992	98304
Scaled-l3–routes	32768	16384	131072
Default	163840	147456	16384

Table 3. UFT Modes — Table Size for S3048–ONUFT Modes —Table Size
UFT Mode	L2 MAC Table Size	L3 Host Table Size	L3 Routes Table Size
Scaled-l2–switch	40960	2048	8192
Scaled-l3–hosts	8192	18432	8192
Default	28672	8192	8192

Table 4. UFT Modes — Table Size for S41XX-ON seriesUFT Modes —Table Size
UFT Mode	L2 MAC Table Size	L3 Host Table Size	L3 Routes Table Size
Scaled-l2–switch	278528	4096	16384
Scaled-l3–hosts	16384	266240	16384
Scaled-l3–routes	16384	4096	262144
Default	81920	69632	131072

Table 5. UFT Modes — Table Size for Z9100-ON UFT Modes —Table Size
UFT Mode	L2 MAC Table Size	L3 Host Table Size	L3 Routes Table Size
Scaled-l2–switch	139264	8192	16384
Scaled-l3–hosts	8192	139264	16384
Scaled-l3–routes	8192	8192	131072
Default	73728	73728	16384

Table 6. UFT Modes — Table Size for Z9264F-ON UFT Modes —Table Size
UFT Mode	L2 MAC Table Size	L3 Host Table Size	L3 Routes Table Size
Scaled-l2–switch	270336	8192	32768
Scaled-l3–hosts	8192	270336	32768
Scaled-l3–routes	8192	8192	262144
Default	139264	139264	32768

Table 7. UFT Modes — Table Size for S52XX-ON seriesUFT Modes —Table Size
UFT Mode	L2 MAC Table Size	L3 Host Table Size	L3 Routes Table Size
Scaled-l2–switch	294912	16384	16384
Scaled-l3–hosts	32768	278528	16384
Scaled-l3–routes	32768	16384	389120
Default	163840	147456	16384

Table 8. UFT Modes — Table Size for S42xxFB-ONUFT Modes —Table Size
UFT Mode	L2 MAC Table Size	L3 Host Table Size	L3 Routes Table Size
Default	250 K	48 K	130 K

Table 9. UFT Modes — Table Size for S42xxFBL-ONUFT Modes —Table Size
UFT Mode	L2 MAC Table Size	L3 Host Table Size	L3 Routes Table Size
Default	250 K	48 K	2 Million

NOTE: The L3 routes table size for Scaled-l3-routes mode might vary depending on the routes that are being installed.