Dell SmartFabric OS10 User Guide Release 10.5.4

• notification-type notification-option — Enter an SNMP notification type, and optionally, a notification option for the type.

  Table 1. Notification types and optionsNotification types and options

  Notification type	Notification option
  config—Enable startup configuration change traps.	None
  entity—Enable entity change traps.	None
  envmon—Enable SNMP environmental monitor traps.	fan — Enable fan traps. power-supply — Enable power-supply traps. temperature — Enable temperature traps.
  lldp—Enable LLDP state change.traps.	rem-tables-change — Enable the lldpRemTablesChange trap.
  snmp—Enable SNMP traps.	authentication — Enable authentication traps. coldstart — Enable coldstart traps when you power on the switch and the SNMP agent initializes. linkdown — Enable link-down traps. linkup — Enable link-up traps. warmstart — Enable warmstart traps when the switch reloads and the SNMP agent reinitializes.
  bfd—Triggers SNMP traps when the state of BFD session changes to UP or DOWN from any other state.	None
  bgp—Triggers SNMP traps when the state of BGP session changes to UP or DOWN from any other state.	None

If you do not enter a notification-type or notification-option parameter with command, all traps are enabled. If you enter only a notification-type, all notification-option traps associated with the type are enabled.

To enable specific SNMP trap types, re-enter the command multiple times with different notification types and options.

To configure a host to receive SNMP notifications, use the snmp-server host command.

OS10(config)# snmp-server enable traps envmon fan 
OS10(config)# snmp-server enable traps envmon power-supply
OS10(config)# snmp-server enable traps snmp 
OS10(config)# no snmp-server enable traps snmp
OS10(config)# snmp-server enable traps bgp
OS10(config)# snmp-server enable traps bfd