Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell SmartFabric OS10 User Guide Release 10.5.4

PDF

show ipv6 pim tib

Displays the PIM multicast routing database information.

Syntax
show ipv6 pim [vrf vrf-name] tib [group-address [source-address]]
Parameters
  • vrf [vrf-name]—Enter the keyword vrf followed by the name of the VRF to display PIM multicast-routing information corresponding to that nondefault VRF.
    NOTE: Applies to specific VRF instance if input is provided, else applies to the default VRF.
  • group-address—Enter the multicast group address to view RP mappings for a specific group.
  • source-address—Enter the source address.
Default
None
Command Mode
EXEC
Usage Information
None
Example 
OS10#show ipv6 pim tib

PIM Multicast Routing Table
Flags: S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register Flag, T - SPT-bit set, J - Join SPT,
K - Ack-Pending state
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode

(*, fffe:ffff:225:1:1::), uptime 00:01:27, expires 00:00:00, RP 151:1:1::1, flags: SCJ
  Incoming interface: Ethernet 1/1/1, RPF neighbor fe80::3617:ebff:fe1f:6b82
  Outgoing interface list:
    Ethernet 1/1/12  Forward/Sparse   00:01:27/Never
Supported Releases
10.5.4.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\