Dell PowerFlex Rack with PowerFlex 3.x Administration Guide

Exit SDS in maintenance mode

Use this procedure to exit an SDS from maintenance mode.

1. Connect to the PowerFlex GUI presentation server through https://<ipaddress>:8443 using MDM.
2. In the left pane, click Configuration > SDSs.
3. In the right pane, select the relevant SDS and click More > Exit Maintenance Mode.
4. In the Exit SDS into Maintenance Mode dialog box, select Instant.
5. Click Exit Maintenance Mode.
6. Verify that the operation completes successfully and click Dismiss.
   Repeat for each PowerFlex node in the protection domain.