Dell PowerFlex Rack with PowerFlex 3.x Administration Guide

Deactivate PowerFlex protection domains using PowerFlex version prior to 3.5

Use this procedure to deactivate both source and destination PowerFlex protection domains using a PowerFlex version prior to 3.5 if asynchronous replication is enabled.

1. From the PowerFlex GUI, click Backend/Storage and change the view to By SDS.
2. For each protection domain, select Inactivate Protection Domain.
3. Click OK and type the administrator password when prompted. Repeat for each protection domain and verify that each is deactivated.
4. Repeat for each protection domain and verify that each is deactivated.
5. Exit the PowerFlex GUI.