Dell EMC PowerFlex Appliance Administration Guide

Full network automation: Deploying a PowerFlex storage-only node

This procedure describes how to deploy a PowerFlex storage-only node with Red Hat Enterprise Linux or CentOS using full network automation option with PowerFlex Manager. The full network automation option will configure changes to physical switches.

1. Log in to PowerFlex Manager.
2. Add OS image to the repository.
   NOTE Skip this step if the OS image is already added to the repository.
   1. Click Settings from menu bar and click Compliance and OS Repositories.
   2. Click the OS Image Repositories tab.
   3. Click Add to open Add OS Image Repository wizard and enter the following:

      OS image information	Details
      Repository name	Enter <Enter Embedded OS image name>.
      Image type	Select Red Hat / CentOS 7.
      Source path and filename	Enter http://<server IP>/<folder>/<image name>.iso.
      Username	Enter <username>.
      Password	Enter <password>.

   4. Validate the path is working correctly, click Test Connection.
   5. Click Add to upload the ISO image.
3. Click Templates.
4. Click Add a Template to open the Add a Template page.
   1. Enter the Template Name.
   2. Click Next.
   3. Under Create Template, enter the following details:

      Clone template	Details
      Template name	Enter <Template name>.
      Template Category	Select Create New Category.. Enter a name in the New Category Name box.
      Template Description	Enter <Template Description> . Example: storage-only nodes with RedHat or CentOS
      Firmware and software compliance	Select the latest Intelligent Catalog version from the list.
      Who should have access to the service deployed from this template?	Select from list who should have access to this service template.

5. Click Save.
6. Click Add Node to open the Node wizard and select Full Network Automation.
   1. Click Continue.
   2. Enter the following details:

      Node	Details
      Component name	Enter <Embedded OS Image>.
      Number of instances	Enter <Number>.
      Related components	Select Associate Selected. Check checkbox for PowerFlex cluster.

   3. Click Continue.
   4. Under OS Settings, enter the following settings:

      Description	Values
      Host name selection	Select <appropriate host name selection>.
      OS image	Select < Embedded OS Image>.
      OS credentials	Select <OS Credential Name>.
      Timezone	Select <Time zone>
      NTP server	Select <NTP Server>
      Use node for Dell EMC PowerFlex	Click checkbox.
      PowerFlex role	Select Storage Only.
      Enable compression	Select the check box (based on your requirement).
      Enable encryption	Select the check box (based on your requirement).
      Enable replication	Select the check box (based on your requirement).
      Switch port configuration	Select Port Channel (LACP enabled)
      Teaming and bonding configuration	Select Mode4 (IEEE 802.3ad policy)

   5. Under SVM OS Settings, enter the details within the following table:

      SVM OS settings	Details
      Host name selection	Select < appropriate host name selection >.
      Host name template	Enter < host name template >.
      OS credentials	Select < OS Credentials >.
      NTP server	Enter < IP address >.

   6. Under Hardware Settings, enter the details within the following table:

      Hardware settings	Details
      Target boot device	Select Local Flash Storage for DellEMC PowerFlex.
      Node pool	Select <pool name >.

   7. Under BIOS Settings, enter the details within the following table:

      BIOS settings	Details
      System profile	Select Performance.
      User accessible USB ports	Select All Ports On.
      Number of cores per processor	Select All.
      Virtualization technology	Select Enabled.
      Logical processor	Select Enabled.
      Execute disable	Select Enabled.
      Node interleaving	Select Enabled.

   8. Under Network Settings, follow the steps below to add interfaces.
   9. Click Add New Interface to create the first interface.
   10. Under Interface 1, enter the following details:

       Network settings	Details
       Port layout	Select Two port 25 gigabit.

   11. Under Port 1, click Choose Networks to open Interface 1 Port 1 Network Configuration window.
   12. Select the checkboxes for the following networks:

       Selected networks	Description
       powerflex-data2-<vlanid >	Powerflex-Data2
       powerflex-data4-<vlanid > (if required)	Powerflex-Data4
       Powerflex-mgmt-<vlanid >	Powerflex-Management
       powerflex-prod-<vlanid>	Production Network

   13. Click >> to add the selected networks to the right column and click Save.
   14. Under Port 2, click Choose Networks to open Interface 1 Port 2 Network Configuration window.
   15. Select the checkboxes for the following networks:

       Selected networks	Description
       powerflex-data1-<vlanid >	Powerflex-Data1
       powerflex-data3-<vlanid > (if required)	Powerflex-Data3

   16. Click >> to add the selected networks to the right column and click Save.
   17. Click Add New Interface to create the second interface.
   18. Under Interface 2, enter the following details:

       Hardware settings	Details
       Port Layout	Select Two port 25 gigabit.

   19. Under Port 2, click Choose Networks to open Interface 2 Port 1 Network Configuration window.
   20. Select the checkboxes for the following networks:

       Selected networks	Description
       powerflex-data2-<vlanid >	Powerflex-Data2
       powerflex-data4-<vlanid > (if required)	Powerflex-Data4
       Powerflex-mgmt-<vlanid >	Powerflex-Management
       pxe-<vlanid>	PXE Network

   21. Click >> to add the selected networks to the right column and click Save.
   22. Under Port 2, click Choose Networks to open Interface 2 Port 2 Network Configuration window.
   23. Select the checkboxes for the following networks:

       Selected networks	Description
       powerflex-data1-<vlanid >	Powerflex-Data1
       powerflex-data3-<vlanid > (if required)	Powerflex-Data3

   24. Click >> to add the selected networks to the right column and click Save.
   25. Click Validate Settings, if there are any errors, correct them and click Close.
   26. Click Save to complete the clone creation.
7. Create the clusters.
   1. Click Add Cluster to create PowerFlex Cluster.
   2. Click Component Name > PowerFlex Cluster.
   3. Select Associate All or Associate Selected.
   4. Click Continue.
   5. Under PowerFlex Settings, enter the details within the following table:

      PowerFlex settings	Details
      Target PowerFlex Gateway	Select < New Target PowerFlex Gateway VM >.
      Protection domain name	Select Auto generate protection domain name (Recommended).
      Protection domain name template	Leave as default: PD-${num}
      Acceleration pool name NOTE Only available if compression is enabled.	Select Auto generate acceleration pool name (Recommended).
      Acceleration pool name template NOTE Only available if compression is enabled.	Leave as default: Site-AP-${num}
      Storage pool name	Select Auto generate storage pool name (Recommended).
      Number of storage pools	Select < number >.
      Storage pool name template	Leave as default.
      Granularity NOTE Only available if compression is enabled.	Select < Fine or Medium >.
      Enable fault sets	Check box if fault sets need to be enabled. NOTE If the PowerFlex configuration includes fault sets, contact Dell EMC support for assistance. Do not go to the procedure until you have received guidance from a support representative.

   6. Click Save.
8. In the Template Information box, click Publish Template.
9. In the pop-up, click Yes.
10. On the Storage Template page, under Template Information, click Deploy and select the following:

    Deploy settings	Details
    Select published template	Select < Current Name of Template >.
    Service name	Enter < Service Name >.
    Service description	Enter < Service Description >.
    Firmware and software compliance	Select the latest Intelligent Catalog version from list.
    Who should have access to the service deployed from this template	Select from list who should have access to this service template.

11. Click Next to Deployment setting page.
12. Validate settings and click Next to Schedule Deployment page.
13. Leave default to Deploy Now.
14. Click Next.
15. Verify the summary page and click Finish.