Displays both the local and remote router MAC addresses used in symmetric IRB.
Syntax
show evpn router-mac {router-vtep [vtep-ip-address]}
Parameters
vtep-ip-address — (Optional) Enter the IP address of a remote VTEP.
Default
Not configured
Command mode
EXEC
Usage information
Use the
show evpn router-mac remote-vtep command to display the router MAC address used on the switch and on specified remote VTEPs. Use the
router-mac command to create a local router MAC address. The show evpn router-mac command displays the local router mac and router mac of all remote VTEPs. The show evpn router-mac remote-vtep [vtep-ip-address] command displays router mac of specified remote VTEP.
Example
OS10# show evpn router-mac
Local Router MAC : 14:18:77:25:4e:4d
Remote-VTEP Router's-MAC
4.4.4.4 14:18:77:25:6f:4d
5.5.5.5 00:00:01:00:a3:b4
Supported releases
10.5.1.0 or later
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\