Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• notification-type notification-option — Enter an SNMP notification type, and optionally, a notification option for the type.

  Table 1. Notification types and optionsNotification types and options

  Notification type	Notification option
  entity — Enable entity change traps.	None
  envmon — Enable SNMP environmental monitor traps.	fan — Enable fan traps. power-supply — Enable power-supply traps. temperature — Enable temperature traps.
  lldp — Enable LLDP state change traps.	rem-tables-change — Enable the lldpRemTablesChange trap.
  snmp — Enable SNMP traps.	authentication — Enable authentication traps. coldstart — Enable coldstart traps when you power on the switch and the SNMP agent initializes. linkdown — Enable link-down traps. linkup — Enable link-up traps. warmstart — Enable warmstart traps when the switch reloads and the SNMP agent reinitializes.

If you do not enter a notification-type or notification-option parameter with command, all traps are enabled. If you enter only a notification-type, all notification-option traps associated with the type are enabled.

To enable specific SNMP trap types, re-enter the command multiple times with different notification types and options.

To configure a host to receive SNMP notifications, use the snmp-server host command.

Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.1.0. Also supported in SmartFabric mode starting in release 10.5.0.1.

OS10(config)# snmp-server enable traps envmon fan 
OS10(config)# snmp-server enable traps envmon power-supply
OS10(config)# snmp-server enable traps snmp 

OS10(config)# no snmp-server enable traps snmp