Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell EMC SmartFabric OS10 User Guide Release 10.5.0

PDF

show vlt

Displays information on a VLT domain.

Syntax
show vlt domain-id delay-restore orphan-port
Parameter
  • domain-id — Enter a VLT domain ID, from 1 to 255.
  • delay-restore orphan-port - Enter the delay-restore orphan-port keyword to display the delay-restore orphan-port status.
Default
Not configured
Command Mode
EXEC
Usage Information
In the following example, the status of the VLT node should be up. If you see the role for this VLT node listed as primary, the role on the peer node should be listed as secondary.
Example 
OS10# show vlt 255
Domain ID                  : 255
Unit ID                    : 1
Role                       : primary
Version                    : 2.0
Local System MAC address   : 34:17:eb:3a:bd:80
Role priority              : 1
VLT MAC address            : aa:bb:cc:dd:ee:ff
IP address                 : fda5:74c8:b79e:1::1
Delay-Restore timer        : 100 seconds
Peer-Routing               : Enabled
Peer-Routing-Timeout timer : 9999 seconds
VLTi Link Status
    port-channel1000       : up

VLT Peer Unit ID    System MAC Address    Status    IP Address             Version
----------------------------------------------------------------------------------
  2                 34:17:eb:3a:c2:80      up       fda5:74c8:b79e:1::2     2.0

WHEN VLT DELAY-RESTORE TIMER IS RUNNING:

 

OUTPUT1 - Configurations enabled on discontinuous interfaces

OS10# show vlt 1 delay-restore-orphan-port

VLT Delay-Restore timer                                       : 90 seconds

Remaining time                                                : 60 seconds

Delay-Restore Orphan-Port enabled interfaces                  : Eth1/1/10-1/1/15,1/1/17,1/1/20

                                                                 Po10-15,17,20

Delay-Restore Orphan-Port Ignore VLTi Fail enabled interfaces : Eth1/1/12-1/1/14,1/1/20

                                                                 Po10-12,Po17

 

 

WHEN DELAY-RESTORE TIMER HAS EXPIRED/NOT-RUNNING:

OS10# show vlt 1 delay-restore-orphan-port

VLT Delay-Restore timer                                       : 90 seconds

Delay-Restore Orphan-Port enabled interfaces                  : Eth1/1/8

                                                                 Eth1/1/10

                                                                 Po1

                                                                 Po4

Delay-Restore Orphan-Port Ignore VLTi Fail enabled interfaces : Eth1/1/10

                                                                 Po4
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\