Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell EMC SmartFabric OS10 User Guide Release 10.5.0

PDF

show smartfabric validation-errors

Displays all topology validation-error information such as category, subcategory, description, recommended action, severity, timestamp, EEMI, problem, and recommended link for each error seen.

Syntax
show smartfabric validation-errors
Parameters
None
Default
None
Command Mode
EXEC
Usage Information
Use the command to view a list of topology validation errors with detailed description about each error.

This command is supported both in Full Switch and SmartFabric modes.

Supported on the MX9116n and MX5108n switches starting in release 10.5.0.1. Also available on SFS-supported OS10 switches starting in release 10.5.0.3. For supported platforms, see SmartFabric Services for leaf and spine.

NOTE The show smartfabric validation-errors CLI command can be executed in any IOM that is a part of the same cluster.
Example 
OS10# show smartfabric validation-errors
----------------------------------------------------------
ErrorKey         : d77d0133-f8c8-4cd7-82b5-83266e5361eb-ISL-
[ICL-3_REVERSE]-NotFound-Issue
MessageID        :
Description      : Unable to validate the SmartFabric because 
the VLTi cable for link ICL-3_REVERSE is not connected as per 
fabric design 2xMX9116n_Fabric_Switching_Engines_in_same_chassis.
EEMI             : NFAB0012
Category         : FABRIC_ERROR
Subcategory      : ISL_ERROR
Severity         : SEVERITY_1
Recommended Action:Make sure that the VLTi cables are connected
to the correct ports as per the selected fabric design.
Timestamp        : 1587488570
Problem Link
    SourceNode          :HRA0028
    SourceInterface     :HRA0028:ethernet1/1/38
    DestinatioNode      :HRA0027
    DestinationInterface:
Recommended Link
    SourceNode          :HRA0028
    SourceInterface     :HRA0028:ethernet1/1/38
    DestinatioNode      :HRA0027
    DestinationInterface:HRA0027:ethernet1/1/38
----------------------------------------------------------            

----------------------------------------------------------
ErrorKey         : 8ca24343-c819-4d0b-ab12-2b9d99a36079-ISL-
[ICL-2_REVERSE]-NotFound-Issue
MessageID        :
Description      : Unable to validate the SmartFabric because 
the VLTi cable for link ICL-2_REVERSE is not connected as per 
fabric design 2xMX5108n_Ethernet_Switches_in_same_chassis.
EEMI             : NFAB0012
Category         : FABRIC_ERROR
Subcategory      : ISL_ERROR
Severity         : SEVERITY_1
Recommended Action:Make sure that the VLTi cables are connected
to the correct ports as per the selected fabric design.
Timestamp        : 1587490907
Problem Link
    SourceNode          :HRA0038
    SourceInterface     :HRA0038:ethernet1/1/9
    DestinatioNode      :HRA0037
    DestinationInterface:
Recommended Link
    SourceNode          :HRA0038
    SourceInterface     :HRA0038:ethernet1/1/9
    DestinatioNode      :HRA0037
    DestinationInterface:HRA0037:ethernet1/1/9
----------------------------------------------------------
Supported Releases
10.5.0.1 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\