Dell EMC SmartFabric OS10 User Guide Release 10.5.0

PDF

show npg node-interface

Display details in a Node-facing interface.

Syntax

show npg node-interfaces [vfabric vfabric-id]

Parameters

None

Default

Not configured

Command Mode

EXEC

Usage Information

Displays the statistics of node facing interfaces in all available or specified vFabrics.

This command is supported in NPG mode.

The following table lists the fields and descriptions displayed in the output:

Table 1. Fields and DescriptionsFields and Descriptions
Fields	Description
Node Intf	Interface name of the port to which a FCoE or FC Node (Server) is connected
FLOGI	Number of Fabric Login Sessions in the node-facing interface
FDISC	Number of Fabric Discovery Sessions in the FC uplink interface
Re-distributed	Number of sessions redistributed for better load balancing in the interface

Example

OS10#show npg node-interfaces vfabric 100 
VFabric Id : 100
--------------------------------------------------
Node Intf      FLOGI      FDISC     Re-distributed
--------------------------------------------------
Fc 1/1/9       1          1         2
Fc 1/1/10      1          1         2
Eth 1/1/54     1          1         2
Eth 1/1/55     1          9         10

OS10#show npg node-interfaces  

VFabric Id : 100
Node Intf      FLOGI      FDISC     Re-distributed
---------------------------------------------------
Fc 1/1/9       1          1         2
Fc 1/1/10      1          1         2
Eth 1/1/54     1          1         2
Eth 1/1/55     1          9         10

VFabric Id : 200
Node Intf      FLOGI      FDISC     Re-distributed
---------------------------------------------------
Fc 1/1/7       1          1         2

VFabric Id : 300
Node Intf     FLOGI       FDISC     Re-distributed
---------------------------------------------------
Eth 1/1/51    1           9         10

Supported Releases

10.4.0E(R1) or later