Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell EMC SmartFabric OS10 User Guide Release 10.5.0

PDF

show mac address-table extended

Displays MAC addresses learned on all VLANs and VXLANs.

Syntax
show mac address-table extended [address mac-address | interface {ethernet node/slot/port:subport | port-channel number} | static | dynamic]
Parameters
address mac-address
Display only information about the specified MAC address.
interface ethernet node/slot/port[:subport]
Display only MAC addresses learned on the specified interface.
interface port-channel number
Display only MAC addresses learned on the specified port channel.
static
Display only static MAC addresses.
dynamic
Display only dynamic MAC addresses.
Default
Not configured
Command mode
EXEC
Usage information
By default, MAC learning from a remote VTEP is enabled. Use this command to verify the MAC addresses learned both on VXLAN virtual networks and VLANs on the switch. The show mac address-table command displays the MAC addresses learned only on LAN port and VLAN interfaces.
Example
OS10# show mac address-table extended 
Virtual-Network  VlanId  MAC Address         Type      Interface/Remote-VTEP
----------------------------------------------------------------------------
-                500     00:00:00:00:11:11   dynamic   ethernet1/1/31:1
-                500     00:00:00:00:44:44   dynamic   port-channel1000
-                1       aa:bb:cc:dd:f0:03   static    port-channel1000
-                500     aa:bb:cc:dd:f0:03   static    port-channel1000
-                4000    aa:bb:cc:dd:f0:03   static    port-channel1000
10000                    00:00:00:00:00:11   dynamic   ethernet1/1/31:1
10000            100     00:00:00:00:00:44   dynamic   port-channel1000
10000            100     00:00:00:00:00:55   dynamic   port-channel10
10000                    00:00:00:00:00:77   dynamic   VxLAN(32.1.1.1)
20000            300     00:00:00:00:00:22   dynamic   port-channel100
20000            300     00:00:00:00:00:33   dynamic   port-channel1000
20000            300     00:00:00:00:00:66   dynamic   port-channel10
20000                    00:00:00:00:00:88   dynamic   VxLAN(32.1.1.1)
Supported releases
10.4.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\