Dell EMC SmartFabric OS10 User Guide Release 10.5.0

• vrf vrf-name — (OPTIONAL) Enter vrf to view information about BGP peers in a peer group corresponding to that VRF.
• peer-group-name — (Optional) Enter the peer group name to view information about that peer-group only.

• Peer-group — Displays the peer group name. Minimum time displays the time interval between BGP advertisements.
• Administratively shut — Displays the status of the peer group if you do not enable the peer group. If you enable the peer group, this line does not display.
• BGP version — Displays the BGP version supported.
• Description — Displays the descriptive name that is configured for the BGP peer template. This field is displayed only when the description is configured.
• For address family — Displays IPv4 unicast as the address family.
• BGP neighbor — Displays the name of the BGP neighbor.
• Number of peers—Displays the number of peers that are configured for this peer group.
• Peer-group members — Lists the IP addresses of the peers in the peer group. If the address is outbound optimized, an * displays next to the IP address.

OS10# show ip bgp peer-group bgppg 
Peer-group bgppg, remote AS 103 
   BGP version 4 
   Minimum time between advertisement runs is 30 seconds  
   Description: peer_template_1_abcd 
   For address family: Unicast 
   BGP neighbor is bgppg, peer-group external 
   Update packing has 4_OCTET_AS support enabled 

OS10# show ip bgp peer-group ebgp summary
BGP router identifier 32.1.1.1  local AS number 6
Neighbor      AS   MsgRcvd   MsgSent   Up/Down   State/Pfx
17.1.1.2      7    7         6         00:01:54  5