Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell EMC SmartFabric OS10 User Guide Release 10.5.0

PDF

police

Configures traffic policing on incoming traffic.

Syntax
police {cir committed-rate [bc committed-burst-size]} {pir peak-rate [be peak-burst-size]}
Parameters
  • cir committed-rate — Enter a committed rate value in kilo bits per second, from 0 to 4000000.
  • bc committed-burst-size — (Optional) Enter the committed burst size in packets for control plane policing and in KB for data packets, from 16 to 200000.
  • pir peak-rate — Enter a peak-rate value in kilo bits per second, from 0 to 40000000.
  • be peak-burst-size — (Optional) Enter a peak burst size in kilo bytes, from 16 to 200000.
Defaults
  • bc committed-burst-size value is 200 KB for control plane and 100 KB for all other class-map types
  • be peak-burst-size value is 200 KB for control plane and 100 KB for all other class-map types
Command Mode
POLICY-MAP-CLASS-MAP
Usage Information
If you do not provide the peak-rate pir values, the committed-rate cir values are taken as the pir values. Only the ingress QoS policy type supports this command. For control-plane policing, the rate values are in pps.
Example
OS10(conf-pmap-c-qos)# police cir 5 bc 30 pir 20 be 40
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\