Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell EMC SmartFabric OS10 User Guide Release 10.5.0

PDF

lldp tlv-select basic-tlv

Enables or disables TLV attributes to transmit and receive LLDP packets.

Syntax
lldp tlv-select basic-tlv {port-description | system-name | system-description | system-capabilities | management-address [ipv4 | ipv6]}
Parameters
  • port-description — Enable or disable the port description TLV.
  • system-name — Enable or disable the system TLV.
  • system-description — Enable or disable the system description TLV.
  • system-capabilities — Enable or disable the system capabilities TLV.
  • management-address — Enable or disable the management address TLV (IPv4 and IPv6).
  • management-address ipv4 - Enable or disable only the IPv4 management address TLV.
  • management-address ipv6 - Enable or disable only the IPv6 management address TLV.
Default
Enabled
Command Mode
INTERFACE
Usage Information
The no form of the command disables TLV attribute transmission and reception in LLDP packets.
Example
OS10(conf-if-eth1/1/3)# lldp tlv-select basic-tlv system-name
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\