Dell EMC SmartFabric OS10 User Guide Release 10.5.0

Configure Jump Host wizard

A jump host is a designated port to which an external device such as laptop can be connected. You can configure only one port in a leaf switch as a jump port for the external device to connect to L3 fabric. You can select any available port that is not part of an uplink and ICL, and port connected to a server in SmartFabric deployment.

This wizard allows you to configure the jump host. To do so:

1. Launch the Configure Jump Host wizard.
2. Assign a user-friendly name and description for the jump host.
3. Select a leaf switch from the rack.
4. Select an interface of the leaf switch as the jump host.
5. Associate an untagged network with the jump host, and click OK.

You can view the configured jump host in SFS GUI Uplinks tab. You can also delete any created jump host from this tab. Select the jump host from the list, and click DELETE.