Dell EMC SmartFabric OS10 User Guide Release 10.5.0

This example shows how to configure SNMP on the switch, including SNMP engine ID, views, groups, and users.

OS10(config)# snmp-server contact "Contact Support"
OS10(config)# snmp-server engineID remote 192.168.1.2 udp-port 502 0xdefa
OS10(config)# snmp-server engineID local test
OS10(config)# snmp-server group sngroup 2c notify notofy_view
OS10(config)# snmp-server group snv3group 3 noauth  read read_view
OS10(config)# snmp-server user snuser sngroup 3 auth sha a2FubmFuX3Rlc3Q=
OS10(config)# snmp-server view readview 1.3.6.1.2.1.2.2 included
OS10(config)# snmp-server view snview .1 excluded
OS10(config)# do show snmp engineID local
Local default SNMP engineID: 0x800002a20474657374

OS10(config)# do show snmp engineID remote
Remote Engine ID      IP-addr       Port
0xdefa                192.168.1.2   502
OS10(config)# do show snmp group
groupname               : sngroup
version                 : 2c
notifyview              : notofy_view

groupname               : snv3group
version                 : 3
security level          : noauth
readview                : read_view

OS10(config)# do show snmp user
User name                 : snuser
Group                     : sngroup
Version                   : 3
Authentication Protocol   : SHA

OS10(config)# do show snmp view
view name               : readview
OID                     : 1.3.6.1.2.1.2.2
included                : True

view name               : snview
OID                     : .1
excluded                : True