Dell EMC SmartFabric OS10 User Guide Release 10.5.0

Copy running configuration

The running configuration contains the current OS10 system configuration and consists of a series of OS10 commands. Copy the running configuration to a remote server or local directory as a backup or for viewing and editing. The running configuration is copied as a text file that you can view and edit with a text editor.

Copy running configuration to local directory or remote server

OS10# copy running-configuration {config://filepath | home://filepath |
ftp://userid:passwd@hostip/filepath | scp://userid:passwd@hostip/filepath |
sftp://userid:passwd@hostip/filepath | tftp://hostip/filepath}

OS10# copy running-configuration scp://root:calvin@10.11.63.120/tmp/qaz.txt 

Copy file to running configuration

To apply a set of commands to the current running configuration and execute them immediately, copy a text file from a remote server or local directory. The copied commands do not replace the existing commands. If the copy command fails, any commands that were successfully copied before the failure occurred are maintained.

OS10# copy {config://filepath | home://filepath |
ftp://userid:passwd@hostip/filepath | scp://userid:passwd@hostip/filepath |
sftp://userid:passwd@hostip/filepath | tftp://hostip/filepath | http://userid@hostip/filepath} 
running-configuration 

OS10# copy scp://root:calvin@10.11.63.120/tmp/qaz.txt running-configuration

Copy running configuration to startup configuration

To display the configured settings in the current OS10 session, use the show running-configuration. To save new configuration settings across system reboots, copy the running configuration to the startup configuration file.

OS10# copy running-configuration startup-configuration