Dell Standard
BIOS management
This section describes how to configure and manage
the ThinOS clients with Dell Standard BIOS.
Supported devices
- Wyse 3040 thin client with ThinOS
- Wyse 3040 thin client with PCoIP
The following Dell BIOS configurations are supported by using
file server (INI parameters):
Table 1. BIOS configuration
optionsThe following table lists the options available
to configure BIOS using INI parameter: Parameters | Settings |
System Configuration |
Audio |
Security |
- Admin Setup Lockout
- Admin Password
- Enable/Disable Admin Password
- Update Admin Password
|
USB Configuration |
- Enable Front USB Ports
- Enable Rear-Left Dual USB 2.0 Ports
|
Power Management |
- Wake-On-LAN
- Disabled
- LAN Only
- LAN with PXE Boot
- AC Recovery
- Power Off
- Power On
- Last Power State
- Auto-On Time
- Disabled
- Every Day
- Weekdays
- Select Days
- Wake-On-USB
|
Device boot | |
For information about INI parameters and their usage,
see the latest Dell Wyse ThinOS INI Reference Guide.
The following are examples of INI parameters:
- Device=DellCmos newpassword=1234567 or newpasswordenc=encrypted strings—Use this INI parameter
to create the admin password when password is not set.
- Device=DellCmos currentpassword=1234567 newpassword="" or currentpasswordenc=encrypted strings—Use this
INI parameter to clear the existing password.