Dell ObjectScale 1.3 Administration Guide

Configure ObjectScale Hardware Alerts Using SNMPv3

Use the ObjectScale Portal user interface to configure hardware alerts using SNMP.

1. From the ObjectScale portal user interface, click Event Settings
   SNMP alerts page is displayed with the current configuration details.
2. Select the checkbox for configuration, and click Edit.
   A dialogue box is displayed with more configuration options.
3. In the Edit SNMP Server window, complete the required fields and click Save

   Option	Description
   FQDN IP	Enter the IP name.
   Port	Enter the Port name.
   Version	Choose SNMPv3.
   Security	Choose whether to include Authentication and Privacy in the communication: NONE AUTH ONLY AUTH and PRIVACY
   Engine ID	This allows communication between known SNMP entries in the administrative domain, and should be configured on the corresponding NMS for access to incoming SNMP traps.
   Auth Protocol	Choose between MD5 (128 bit) or SHA-1 (160 bit).
   Auth Password	Enter the password for Auth Protocol.
   Privacy Protocol	Choose between DES (56 bit) or AES (128, 192 or 256 bit) to encrypt all SNMPv3 transmissions.

   The SNMP server is added successfully.
4. Click Send a Test Trap to test the configuration.
   A message is displayed indicating a successful test trap request, and the SNMP Sever status is changed to Success.