The 2U enclosure must be operated from a power supply input voltage range of 100–240 VAC, 50/60Hz.
The 5U enclosure must be operated from a power supply input voltage range of 200–240 VAC, 50/60Hz.
Provide a power source with electrical overload protection to meet the requirements in the technical specification.
The power cable must have a safe electrical grounding connection. Check the grounding connection of the enclosure before you turn on the power supply.
NOTE The enclosure must be grounded before applying power.
The plug on the power supply cord is used as the main disconnect device. Ensure that the socket outlets are located near the equipment and are accessible.
2U enclosures are intended to operate with two PCMs.
5U84 enclosures are intended to operate with two PSUs.
Follow the instructions that are shown on the power-supply disconnection caution label that is attached to the power cooling modules.
CAUTION Do not remove the covers from the enclosure or any of the modules as there is a danger of electric shock inside.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\