The following sections provide information
about hardware upgrades.
1 GbE FC to 10 GbE
FC Controller Upgrade
FS8600 1 GbE FC configurations can be
upgraded to 10 GbE FC by replacing the network interface cards (NICs).
Contact Dell Technical Support for details about this upgrade.
24-GB and 48-GB Appliances
The 48-GB FS8600 appliance supports 48-GB controllers only. The 24-GB
FS8600 appliance supports 24-GB and 48-GB controllers; however, 48-GB
controllers in a 24-GB appliance are limited to 24 GB.
Appliance Replacement
A 24-GB FS8600 appliance can be replaced with a 24-GB or 48-GB appliance.
A 48-GBFS8600 appliance can be replaced with a 48-GB appliance
only.
NOTE: All
appliances in the system must be equal in terms of client connectivity
type (1 GbE or 10 GbE), storage connectivity type (FC or iSCSI), and
port count.
System Expansion (Adding
Appliance)
A 24-GB FS8600 FluidFS system can be expanded by
adding either a 24-GB or 48-GB appliance. If the system includes
a 48-GB FS8600 appliance, the system can be expanded by adding a 48-GB
appliance only.
All appliances in the system must have
the same client connectivity type (1 GbE or 10 GbE), storage connectivity
type (FC or iSCSI), and port count.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\