OpenManage Integration for VMware vCenter Version 5.2 User's Guide

View Dell EMC chassis information

1. On the OMIVV home page, click Hosts & Chassis > Chassis > Chassis List.
   The following information is displayed:

   • Name—Displays an IP address link for each Dell EMC chassis.
   • Health—Displays the health status of chassis.

     To filter by health status of each Dell EMC chassis, click the filter icon present against the search.

   • IP Address/FQDN—Displays the vCenter IP address or FQDN.
   • Service Tag—Displays the Service Tag of the chassis.
   • Chassis URL—Displays the chassis URL.
   • Model—Displays the model name.
   • Role—Applicable only for MX chassis. Displays the role of the chassis (Lead or Member).
   • Last Inventory—Displays the last inventory information.
   • Available Slots—Displays the available slots in chassis.
   • Profile Name—Displays the chassis credential profile name in which the chassis is associated.
   • Location—Displays the location of the chassis.

   If you do not run the inventory, the Name, Last Inventory, Available Slots, Profile Name, Location , and chassis inventory information are not displayed.

   NOTE For a PowerEdge MX chassis in an MCM configuration, the entire MCM infrastructure is managed using the lead chassis. If the member chassis IPs and iDRAC IPs are disabled and or chassis role is changed, Dell EMC recommends removing the existing lead chassis and adds the new lead chassis IP again, and then associate to the chassis credential profile.
2. Select a chassis to view firmware, license type, and warranty-related information.
   If you do not run the inventory, the Name, Firmware, License Type, and Warranty information are not displayed.