VGA monitor and USB keyboard (for initial configuration)
□
Cables for SAN
Fibre Channel with 1GbE appliance or Fibre Channel
with 10GbE appliance
– Four LC Fibre Channel cables for each appliance
10GbE iSCSI appliance – Four LC optical fiber
cables or Twinax cables for each appliance
□
Cables for client network
Fibre Channel with 1GbE appliance – Eight
RJ45/Cat 5e or better cables for each appliance
Fibre Channel with 10GbE appliance or 10GbE iSCSI
appliance
– Four LC optical fiber cables or Twinax cables for
each appliance
□
Cables for internal network
Fibre Channel with 1GbE appliance:
Single appliance – Four RJ45/Cat 5e or better
cables for each appliance (controllers are directly connected to each
other)
Multiple appliances – Eight RJ45/Cat 5e or
better cables for each appliance
Fibre Channel with 10GbE appliance:
Single appliance – Two LC optical fiber cables
or Twinax cables (controllers are directly connected to each other;
two Twinax cables shipped with each appliance)
Multiple appliances – Four LC optical fiber
cables or Twinax cables for each appliance
10GbE iSCSI appliance – None (shared with
SAN cables)
□
(10GbE optical networks only) Intel SFP+ transceivers
purchased from Dell for use in an FS8600 appliance
Fibre Channel with 10GbE appliance:
Client network – Four Intel SFP+ transceivers
for each appliance
Internal network – Four Intel SFP+ transceivers
for each appliance
10GbE iSCSI appliance:
Client network – Four Intel SFP+ transceivers
for each appliance
SAN/internal network – Four Intel SFP+ transceivers
for each appliance
NOTE: The FS8600
appliance is compatible with specific Intel SFP+ transceivers purchased
only from Dell. Other SFP+ transceiver models do not work in the FS8600
appliance.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\