DHCP options
The DHCP options listed in the following table
are accepted by the thin clients.
Table 1. DHCP optionsThe DHCP options listed in the table are accepted
by the thin clients.
Option |
Description |
Notes |
1 |
Subnet Mask |
Required |
3 |
Router |
Optional but recommended. It is not required unless
the thin client must interact with servers on a different subnet. |
6 |
Domain Name Server (DNS) |
Optional but recommended |
12 |
Hostname |
Optional |
15 |
Domain Name |
Optional but recommended |
43 |
Vendor Class Specific Information |
Optional |
50 |
Requested IP |
Required |
51 |
Lease Time |
Required |
52 |
Option Overload |
Optional |
53 |
DHCP Message Type |
Required |
54 |
DHCP Server IP Address |
Recommended |
55 |
Parameter Request List |
Sent by thin client |
57 |
Maximum DHCP Message Size |
Optional (always sent by thin client) |
58 |
T1 (renew) Time |
Required |
59 |
T2 (rebind) Time |
Required |
61 |
Client identifier |
Always sent |
155 |
Remote Server IP Address or name |
Optional |
156 |
Logon User Name used for a connection |
Optional |
157 |
Domain name used for a connection |
Optional |
158 |
Logon Password used for a connection |
Optional |
159 |
Command Line for a connection |
Optional |
160 |
Working Directory for a connection |
Optional |
163 |
SNMP Trap server IP Address list |
Optional |
164 |
SNMP Set Community |
Optional |
165 |
Remote Desktop Connection startup published applications |
Optional |
168 |
Name of the server of the virtual port |
Optional |
186 |
WDM sever IP |
IP addresses of WDM Server. If tag 194 is specified,
then defining this tag is not necessary. |
190 |
WDM secure port |
Optional number, word, or two-bytes array. Specifies
to use HTTPS to communicate with WDM instead of HTTP |
192 |
WDM server port |
Specifies HTTP (non-secure) communication with
WDM. |
194 |
WDM server FQDN |
Optional. If this tag is specified, then defining
tag 186 is not mandatory. |
Data is not available for the Topic