CreationClassName
|
Indicates the name of the class or the subclass that is
used in the creation of an instance. When used with the other key
properties of this class, this property allows all instances of this
class and its subclasses to be uniquely identified.
|
EnabledDefault
|
An enumerated value indicating an administrator's default
or startup configuration for the Enabled State of an element.
Possible values are:
- 2 = Enabled
- 3 = Disabled
- 5 = Not Applicable
- 6 = Enabled but Offline
- 7 = No Default
- 9 = Quiesce
- .. = DMTF Reserved
- 32768..65535 = Vendor Reserved
By default, the element is
Enabled (value = 2).
|
EnabledState
|
An integer enumeration that indicates the enabled and disabled
states of an element. It can also indicate the transitions between
these requested states. For example, shutting down (value =
4) and starting (value =
10) are transient states between enabled
and disabled.
Possible values are:
- 0 = Unknown
- 1 = Other
- 2 = Enabled — Indicates that the element is or could be executing
commands, will process any queued commands, and queues new requests.
- 3 = Disabled — Indicates that the element will not execute commands
and will drop any new requests.
- 4 = Shutting Down — Indicates that the element is in the process
of going to a Disabled state.
- 5 = Not Applicable — Indicates the element does not support being
enabled or disabled.
- 6 = Enabled but Offline — Indicates that the element may be completing
commands, and will drop any new requests.
- 7 = In Test — Indicates that the element is in a test state.
- 8 = Deferred — Indicates that the element may be completing commands,
but will queue any new requests.
- 9 = Quiesce — Indicates that the element is enabled but in a restricted
mode.
- 10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
- 11..32767 = DMTF Reserved
- 32768..65535 = Vendor Reserved
|
Name
|
The Name property uniquely identifies the Service and provides
an indication of the functionality that is managed. This functionality
is described in more detail in the Description property of the object.
|
PrimaryOwnerContact
|
A string that provides information on how the primary owner
of the Service can be reached (for example, phone number, e-mail address,
and so on).
|
PrimaryOwnerName
|
The name of the primary owner for the service, if one is
defined. The primary owner is the initial support contact for the
Service.
|
PrimaryStatus
|
Provides a high level status value, intended to align with
Red-Yellow-Green type representation of status. It should be used
in conjunction with DetailedStatus to provide high level and detailed
health status of the ManagedElement and its subcomponents.
Possible values are:
- 0 = Unknown — Indicates the implementation is in general capable
of returning this property, but is unable to do so at this time.
- 1 = OK — Indicates the ManagedElement is functioning normally.
- 2 = Degraded — Indicates the ManagedElement is functioning below
normal.
- 3 = Error — Indicates the ManagedElement is in an Error condition.
- .. = DMTF Reserved
- 0x8000.. = Vendor Reserved
|
RequestedState
|
An integer enumeration that indicates the last requested
or desired state for the element, irrespective of the mechanism through
which it was requested.
Possible values are:
- 0 = Unknown — Indicates the last requested state for the element
is unknown.
- 2 = Enabled
- 3 = Disabled
- 4 = Shut Down
- 5 = No Change
- 6 = Offline — Indicates that the element has been requested to
transition to the Enabled but Offline EnabledState.
- 7 = Test
- 8 = Deferred
- 9 = Quiesce
- 10 = Reboot — Refers to doing a
Shut Down and then moving
to an
Enabled state.
- 11 = Reset — Indicates that the element is first
Disabled and then
Enabled.
- 12 = Not Applicable
- .. = DMTF Reserved
- 32768..65535 = Vendor Reserved
The actual state of the element is represented by EnabledState.
This property is provided to compare the last requested and current
enabled or disabled states. Note that when EnabledState is set to
5
(Not Applicable), then this property has no meaning. Refer
to the EnabledState property description for explanations of the values
in the RequestedState enumeration.
-
NOTE: The value
No Change
(5)
has been deprecated instead of indicating the last requested
state is
Unknown (0). If the last requested or desired state
is unknown, RequestedState should have the value
Unknown (0), but may have the value
No Change (5).
There are
two new values in RequestedState that build on the statuses of EnabledState.
These are
Reboot (10) and
Reset (11). Shut Down requests
an orderly transition to the Disabled state, and may involve removing
power, to completely erase any existing state. The Disabled state
requests an immediate disabling of the element, such that it will
not execute or accept any commands or processing requests.
This property is set as the result of a method invocation (such as
Start or StopService on CIM_Service), or can be overridden and defined
as WRITEable in a subclass. The method approach is considered superior
to a WRITEable property, because it allows an explicit invocation
of the operation and the return of a result code.
If knowledge
of the last RequestedState is not supported for the EnabledLogicalElement,
the property is NULL or has the value 12
Not Applicable.
|
SystemCreationClassName
|
The CreationClassName of the scoping System.
|
SystemName
|
The Name of the scoping System.
|
TransitioningToState
|
Indicates the target state to which the instance is transitioning.
Possible values are:
- 0 = Unknown
- 2 = Enabled
- 3 = Disabled
- 4 = Shut Down
- 5 = No Change — Indicates that no transition is in progress.
- 6 = Offline
- 7 = Test
- 8 = Defer
- 9 = Quiesce
- 10 = Reboot
- 11 = Reset
- 12 = Not Applicable — Indicates the implementation does not support
representing ongoing transitions.
A value other than
5 or
12 identifies the state
to which the element is in the process of transitioning.
|