Installing the battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the battery and provides a visual representation of the installation procedure.
![Image: Installing the battery](https://dl.dell.com/content/guides/public/Html/xps-15-9520-service-manual/images/GUID-B8D8AF7E-F34B-4FE1-95AE-4247079BC643-low.jpg)
Steps
- Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.
- Adhere the tapes that secure the speaker cable to the battery.
- Replace the four screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
- Replace the four screws (M2x4) that secure the battery to the palm-rest and keyboard assembly.
- Connect the battery cable to the system board.
Data is not available for the Topic