Installing the I/O board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the I/O board and provides a visual representation of the installation procedure.
NOTE:The I/O board consists of the SD-card reader and the audio board.
Steps
- Place the I/O board on the palm-rest and keyboard assembly.
- Connect the screw (M2x4) that secures the I/O board to the palm-rest and keyboard assembly.
- Align the screw hole on the USB Type-C port bracket with the screw hole on the system board.
- Connect the screw (M2x4) that secures the USB Type-C port bracket to the system board.
- Connect the I/O-board cable to the connector on the system board and I/O board.
NOTE:Ensure to connect IO marked side of the I/O-board cable to the I/O daughter board and the side marked MB to the system board.
Data is not available for the Topic