Removing the right fan
About this task
The following images indicate the location of the right fan and provide a visual representation of the removal procedure.
![Image: Removing right fan](https://dl.dell.com/content/guides/public/Html/xps-15-9500-service-manual/images/GUID-CE71F249-212E-45E3-844A-D4181964AAE5-low.jpg)
Steps
- Remove the two screws (M2x4) that secure the I/O-board shield to the fan and palm-rest and keyboard assembly.
- Lift the I/O-board shield off the system board.
- Remove the screw (M2x4) that secures the fan to the system board.
- Disconnect the fan cable from the system board.
CAUTION:Do not hold the fan assembly at the center, as it may damage the center bearing.
- Slide the fan out of the heat sink and lift the fan off the palm-rest and keyboard assembly.
Data is not available for the Topic