System Management
|
Firmware and application packages
|
Enables you to install the ThinOS firmware and application packages.
- Firmware signature
- Operating system firmware update
- Packages update
- Packages compatibility
- BIOS update
- MIX update
|
Limited support
|
BIOS update is not supported.
|
Dell BIOS
|
Enables you to configure the Dell BIOS settings through Wyse Management Suite and Admin Policy Tool.
|
No
|
Not available
|
Admin Policy Tool
|
Enables IT administrators to manage device configurations.
|
Limited support
|
For more information about the supported features, see the
Admin Policy Tool feature matrix.
|
Wyse Device Agent (WDA) settings
|
Enables you to set the Wyse Management Suite information.
|
Yes
|
Not available
|
Wyse Management Suite
|
Enables you to manage ThinOS 9.0-based thin clients using Wyse Management Suite v2.0.
|
Yes
|
Not available
|
System components
|
First Boot Wizard
|
Enables you to configure the thin client settings before you enter the ThinOS system desktop. You can configure the following options using the First Boot Wizard application:
- Select a language.
- Select a keyboard layout.
- Select a time zone.
- Connect to a wired or wireless network.
- Import the Wyse Management Suite configurations or import configurations from a USB drive.
- Select a Broker agent.
|
Yes
|
Not available
|
Printer
|
Enables you to configure the printer that is connected to the thin client.
- Connect a USB printer to the thin client.
- Connect a Serial printer to the thin client.
- Connect a Parallel printer to the thin client.
- Set the printer as COM, LPT, LPD, or SMB printer.
|
Yes
|
If you want to use a mapped printer in the session, use a printer that supports the PostScript printing language.
|
Lock terminal
|
Enables you to lock the thin client using any of the following methods:
- Unplug a signed-on smart card from the thin client.
- Use the Lock Terminal option from the shortcut menu.
- Use the Lock Terminal option from the shutdown dialog box.
- Use a screensaver.
|
Yes
|
Not available
|
Sign off and shut down
|
Enables you to sign out from the current account or shut down the system voluntarily.
Use the shutdown dialog box to perform the following tasks:
- Sign out from your current user account.
- Reboot the system.
- Shut down the system.
- Enter into sleep mode.
- Lock the terminal.
- Reset the system to factory default settings.
|
Yes
|
Not available
|
Classic desktop mode
|
Enables you to use the classic desktop with a horizontal taskbar at the bottom of the screen. The following are the desktop components:
- Shortcut Menu
- Left Menu
- System Tray
- Start Menu
- Connection Manager
|
Yes
|
Not available
|
Network setup—General settings
|
Enables you to configure the following network settings:
- Default gateway for a dual network connection.
- Domain Name System (DNS) and Windows Internet Name Service (WINS).
- Transmission Control Protocol (TCP) timeout.
|
Limited support
|
WINS is not supported.
|
Network setup—DHCP settings
|
Enables you to configure the Dynamic Host Configuration Protocol (DHCP) options to get the DHCP Scope settings from the server.
- DHCP Option ID for Citrix Server—181
- DHCP Option ID for Domain List—182
- DHCP Option ID for Group Registration Key—199
- DHCP Option ID for Wyse Management Suite server—165
- DHCP Option ID for Message Queuing Telemetry Transport (MQTT) server—166
- DHCP Option ID for CA validation—167
- DHCP Option ID for negative input
- DHCP Vendor ID
- DHCP UserClass ID
|
Supported
|
Not available
|
Network setup—Ethernet settings
|
Enables you to configure the following Ethernet connection settings:
- Ethernet port selection for dual Network Interface Controller (NIC).
- Ethernet speed selection.
- IPv4 and IPv6 properties.
- IEEE802.1x authentication.
|
Limited support
|
- Dual IPv6 is not supported.
- SFP is limited support. The thin client cannot fetch the IP address, mostly when you are using a dual network connection.
- The EEE802.1x wired authentication may fail after one minute if using EAP-LEAP.
|
Network setup—WLAN settings
|
Enables you to configure the following wireless connection settings:
- Wireless scan
- Wireless profile (Security/Authentication)
- Add or remove a wireless profile.
- Disable wireless
- Wireless IP configuration
|
Yes
|
Not available
|
Network setup—Proxy settings
|
Enables you to configure the proxy network settings. HTTP, HTTPS, and SOCKS5 protocols are supported.
|
Yes
|
Not available
|
Virtual Private Network (VPN)—OpenConnect
|
Enables you to configure a virtual private network.
|
Yes
|
Not available
|
Wireless connection
|
- Marvell Wireless Chipset 8897
- Intel Wireless Chipset 9560
- IEEE 802.11 a/b/g/n/ac
- Dual Band 2.4G and 5G
- Available Bandwidths and Channels in Chipset Spec
- Securities and authentications—WPA/WPA2, TLS/PEAP/LEAP/FAST/MSCHAPV2/GTC
- Wireless Scanning functionality
- Wireless connectivity—WLAN information, WiFi performance, roaming, Dual-network, Bluetooth, compatibility with routers, APs, and controllers.
|
Limited support
|
- WEP is not supported.
- 802.11r/k is supported on Wyse 5070, Wyse 5470, Wyse 5470 All-in-One clients with Intel Wireless Chipset 9560.
|
Bluetooth
|
Enables you to connect to Bluetooth v3.0 and v4.0 devices.
|
Limited support
|
Bluetooth mouse and keyboard with Bluetooth v3.0 are supported.
|
Audio, USB audio, and DisplayPort audio
|
Enables you to use USB audio and DP audio.
|
Yes
|
DP audio limitations on the Wyse 3040 Thin Client are as follows:
- Audio latency is 1.5 seconds.
- DP audio is disabled by default.
- Works only with screen resolution less than or equal to 1920 x 1080.
- DP audio is supported only on DisplayPort 1.
|
System Preference
|
Enables you to configure the following system settings:
- Screen saver
- Locale
- Terminal name
- Time and date
- Custom information
- Power and Sleep
|
Yes
|
Not available
|
Display setup
|
Enables you to configure the following display settings:
- Display resolution
- Display rotation
- Mirror mode
- Span mode
- Main screen alignment
- Identify screens
- Single screen and multiple screens configuration
|
Yes
|
Not available
|
On-Screen Display (OSD)—Applicable only for Wyse 5470 All-in-One Thin Client
|
Enables you to configure the following OSD settings:
- Adjust brightness
- Turn off and turn on the screen.
- Turn off the screen and wake up the screen using a USB mouse or a USB keyboard.
|
Yes
|
Not available
|
Peripheral settings
|
Enables you to configure the following peripherals settings:
- Mouse settings
- Keyboard settings
- Audio settings
- Serial settings
- Camera settings
- Bluetooth settings
|
Yes
|
Touch screen that needs calibration is not supported.
|
Touch screen—Applicable only for Wyse 5470 Thin Client
|
Enables you to use the touch screen gestures on the Wyse 5470 Thin Client.
|
Yes
|
Not available
|
Touchpad—Applicable only for Wyse 5470 Thin Client
|
Enables you to use the touchpad gestures on the Wyse 5470 Thin Client.
|
Yes
|
Not available
|
Function keys
|
Enables you to use the Function key combinations in both local and Citrix sessions.
|
Limited support
|
Fn key combination does not work in Citrix sessions.
|
Close lid function—Applicable only for Wyse 5470 Thin Client
|
Enables you to turn off or turn on the displays when the lid is closed.
|
Yes
|
Not available
|
Power management—Applicable only for Wyse 5470 Thin Client
|
Enables you to use the following power-saving options—with or without AC power supply:
- Adjust the screen brightness.
- Automatically shut down or enter sleep mode
|
Yes
|
Not available
|
Battery indicator—Applicable only for Wyse 5470 Thin Client
|
Enables you to use the battery indicator to check the battery status of the Wyse 5470 Thin Client.
|
Yes
|
Not available
|
Reset to factory default settings
|
Enables you to reset the thin client to factory default settings.
|
Yes
|
Not available
|
System Tools—Certificates and packages
|
Enables you to configure the following options:
- Import a certificate.
- Delete a certificate.
- Simple Certificate Enrollment Protocol (SCEP)—Request a certificate and automatically enroll using a password.
- Admin Policy Tool to configure SCEP
- View packages list
- Delete one or more packages.
|
Yes
|
Not available
|
Troubleshooting
|
Enables you to use the following options to troubleshoot your thin client:
- Performance Monitor
- Export system settings
- Export screenshots
- Export system logs
- Network capture
- Wireless capture
- Capture USB packets.
- Network ping and Trace route
- Telnet
|
Limited support
|
Extract and restore CMOS are not supported.
|
Session properties
|
Enables you to configure the session settings using Connect Manager or session menu.
|
Yes
|
Not available
|
USB devices
|
Enables you to use the following options:
- Connect to USB 2.0 and USB 3.0 ports.
- USB mapping
- USB redirection
|
Yes
|
Not available
|
Dell Docking Station WD19
|
Enables you to access all peripherals—mouse, keyboard, stereo speakers, external hard drive, and large-screen displays—without having to plug each one into the thin client.
|
Limited support
|
- Audio jack does not work.
- Wake on LAN/USB using the Dell Docking Station WD19 is not supported.
|
Secure Digital (SD) card—Applicable only for Wyse 5470 Thin Client
|
Enables you to import and export files.
|
Yes
|
Not available
|
System Security
|
Trusted Platform Module (TPM)
|
Enables you to enable disk encryption with TPM.
|
Yes
|
Not available
|
Smart card
|
Enables you to use a smart card to authenticate the user.
|
Limited support
|
When you launch a disconnected Citrix Windows 2012/2016 session, the session stops responding.
|
Authentication settings
|
Enables you to configure the following authentication settings:
- OneSign configuration using IP
- OneSign configuration using FQDN
- HealthCast configuration
|
Limited support
|
HealthCast is not supported.
|
Secure Boot
|
Option to enable Secure Boot on the thin client.
|
No
|
Not available
|
ThinOS VDI configuration
|
Broker agent settings
|
Enables you to configure the Citrix Broker agent settings.
|
Yes
|
Not available
|
General settings
|
Enables you to configure the following general options:
- Sign-off automatically
- Shut down the system automatically.
- Restart the system automatically.
- Set default login credentials
|
Yes
|
Not available
|
Global Connection Settings
|
Enables you to configure the settings common to all sessions and all ICA sessions in the
Global Connection Settings window.
|
Yes
|
Not available
|
PNA button menu
|
Enables you to use the following options from the PNA button menu:
- Refresh
- Reconnect
- Log off
- Disconnect
- Manage security questions (Enable SSPR).
|
Yes
|
Not available
|
Sign-on window
|
Enables you to use the login options available on the sign-on window. You can use a smart card, Imprivata, and other two-factor authentication methods to log in to the Citrix session.
|
Yes
|
Not available
|