Installing the hard drive assembly
Steps
- Align the screw holes on the hard drive bracket with the screw holes on the hard drive [1].
- Replace the four (M3x3) screws that secure the hard drive bracket to the hard drive [2].
- Connect the interposer to the hard drive.
- Align the screw holes on the hard drive assembly with the screw holes on the palm rest and keyboard assembly [1].
- Replace the four (M2x3) screws that secure the hard drive assembly to the palm rest and keyboard assembly [2].
- Connect the hard drive cable to the system board and close the latch to secure the cable [3].
Data is not available for the Topic